General information
The rear seat backrest is divided into two
parts at a ratio of 60 to 40. The left rear seat
backrest is connected to the center section.
The rear seat backrests can be folded down
with the respective loops from the rear.
Safety information
Warning
There is a danger of jamming with fold-
ing down the rear seat backrests. There
is a risk of injury or risk of damage to
property. Make sure that the area of move-
ment of the rear seat backrest and the of
the head restraint is clear prior to folding
down.
Warning
If a rear seat backrest is not locked, unse-
cured cargo can be thrown about the car’s
interior; for instance, in the event of an
accident, braking or an evasive maneuver.
There is a risk of injury. Make sure that
the rear seat backrest is locked after fold-
ing it back.
Warning
With a rear seat backrest that is not
locked, the protective effect of the middle
seat belt is not guaranteed. There is a risk
of injury or danger to life. If you are using
the middle seat belt, lock the wider rear
seat backrest.
Warning
The stability of the child restraint system
is limited or compromised with incorrect
seat setting or improper installation of the
child seat. There is a risk of injury or
danger to life. Make sure that the child
restraint system fits securely against the
backrest. If possible, adjust the backrest
tilt for all affected backrests and correctly
adjust the seats. Make sure that seats
and backrests are securely engaged or
locked. If possible and necessary, adjust
the height of the head restraints or remove
them.
Warning
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is
clear when moving the head restraint.
Folding down the rear seat
backrest from the rear
1. Before the rear seat backrest is folded
down, hook the corresponding seat belt
into the belt retainer on the side.
2. Pull the lever up, arrow 1, and fold the
rear seat backrest forward, arrow 2.
Cargo position
Principle
The rear seat backrests can be moved into
an upright loading position.
Seite 230
CONTROLS Cargo area
230
Online Edition for Part no. 01405A7DAD4 - II/23