ter or repair shop, then have the dam-
aged tire renewed.
Emergency wheel
Principle
In the event of a flat tire, the emergency
wheel can be used in place of the wheel
with the faulty tire. The emergency wheel
is only intended for temporary use until the
faulty tire/wheel has been replaced.
General information
Mount one emergency wheel only.
Also check the tire inflation pressure of
the emergency wheel in the cargo area reg-
ularly, and correct it as needed.
Safety information
Warning
The emergency wheel has particular di-
mensions. When driving with an emer-
gency wheel, changed driving properties
may occur, for instance reduced direc-
tional stability when braking, longer brak-
ing distance, and changed self-steering
properties in the limit range. There is a
risk of accident. Drive moderately and do
not exceed a speed of 50 mph/80 km/h.
Overview
The emergency wheel is housed in a well
on the underbody of the vehicle. The screw
connection of the emergency wheel is under
the cargo floor panel, on the floor of the
storage compartment for the onboard vehi-
cle tool kit.
The wheel change tools are under the cargo
floor panel.
Removing the emergency wheel
1. Loosen the nut using the lug wrench
from the onboard vehicle tool kit.
2. Remove the retaining plate.
3. Screw lug wrench onto the thread and
hold in place with one hand.
4. Unlock the locking hexagon of the emer-
gency wheel well using the hexagon at-
tached to retaining plate.
5. Lower the emergency wheel with the
lug wrench.
6. Unscrewing the lug wrench
7. Pull out the well with emergency wheel
under the vehicle toward the rear.
Seite 270
MOBILITY Wheels and tires
270
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
