5. The coolant level is correct if it lies
between the minimum and maximum
marks in the filler neck.
6. Close the lid.
Adding coolant
1. Let the engine cool down.
2. Open the hood, refer to page 273.
3. Turn the lid of the coolant reservoir
slightly counterclockwise to allow any
excess pressure to dissipate, then open
it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant
up to the specified fill level; do not over-
fill.
6. Close the lid.
7. Have the cause of the coolant loss elimi-
nated as soon as possible.
Disposal
Comply with the relevant environ-
mental protection regulations when
disposing of coolant and coolant ad-
ditives.
Seite 280
MOBILITY Coolant
280
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
