Automatic unlocking
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. "Unlock at end of trip"
After the engine is switched off
by pressing the Start/Stop button,
the locked vehicle is automatically un-
locked.
Confirmation signals from the
vehicle
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. Deactivate or activate the desired con-
firmation signals.
– "Flash for lock/unlock"
Unlocking is signaled by flashing
twice, locking by flashing once.
– With alarm system:
"Acoustic signal for lock/unlock"
Unlocking is signaled by one honk of
the horn.
Alarm system
General information
When the vehicle is locked, the vehi-
cle alarm system reacts to the following
changes:
– Unauthorized opening of a door, the
hood or the tailgate.
– Movements in the vehicle interior.
– Changes in the vehicle inclination, such
as during attempts at stealing a wheel or
when towing the vehicle.
– Disconnected battery voltage.
– Improper use of the socket for OBD on-
board diagnostics.
– Locking the vehicle while a device is
connected to the diagnostic socket. For
socket for the OBD on-board diagnos-
tics, refer to page 282.
The alarm system signals these changes vis-
ually and acoustically:
– Acoustic alarm:
Depending on local regulations, the
acoustic alarm may be suppressed.
– Optical alarm:
By flashing of the hazard warning sys-
tem and headlights, where required.
Do not modify the system to ensure func-
tion of the alarm system.
Overview
Indicator light on the interior mirror.
Turning on/off
The alarm system is switched on or off as
soon as the vehicle is locked with the vehi-
cle key or unlocked or locked via Comfort
Access.
Seite 73
Opening and closing CONTROLS
73
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
