The LED illuminates if the safety function is
switched on.
Malfunction
General information
In certain situations a window can only be
operated to a limited extent.
– After a power interruption during the
opening or closing process, the window
can only be operated to a limited extent.
The system must be initialized in this
case.
– The power window motors are equip-
ped with overheating protection. If a
window is opened and closed several
times within a short period of time, the
overheating protection switches the mo-
tor off temporarily. Depending on the
degree of overheating, it may only be
possible to close the window or it may
not be possible to operate it at all.
In this case: allow the power window
motor to cool down.
Initializing the system
The system can be initialized when the ve-
hicle is stationary and the engine is run-
ning.
During initialization, the affected window
closes without jam protection.
Warning
When operating the windows, body parts
and objects can be jammed. There is a risk
of injury or risk of damage to property.
Make sure that the travel path of the win-
dows is clear during opening and closing.
1. Open the affected window completely.
2.
Pull the switch to the resistance
point and hold.
The window closes.
3.
Continue holding the switch
pulled to the resistance point.
The window opens and closes once or
twice after approx. 15 seconds, depend-
ing on the vehicle's equipment.
4. Release switch.
Panoramic glass sunroof
General information
In the event of a severe accident, the glass
sunroof is automatically closed.
Safety information
Warning
Body parts can be jammed when operating
the glass sunroof. There is a risk of injury.
Make sure that the area of movement of
the glass sunroof is clear during opening
and closing.
Overview
Seite 77
Opening and closing CONTROLS
77
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
