▷ After the updating process is complete, the
system restarts.
▷ Remove the medium with the navigation
data after the update.
Performing the update
1. Depending on the equipment: insert the
USB device with the navigation data into
the USB interface in the glove compartment
or in the USB audio interface.
2. Follow the instructions on the Control Dis‐
play.
3. Enter the authorization code of the USB de‐
vice with the navigation data.
4. Drive off.
The update starts after the authorization code
is entered.
When the update is completed, the system re‐
starts.
Seite 133
Navigation system
NAVIGATION
133
Online Edition for Part no. 01 40 2 964 459 - VI/15
To Next Page
Loading...
Need help?
General
