To Next PageTo Next Page
Need help?Do you have a question about the MiniMax C 26 GENIUS and is the answer not in the manual?
Defines the purpose for which the machine was manufactured and contains all the necessary information for safe, correct use.
Details on the identification plate affixed to the machine base for manufacturer and machine data.
Advice on performing maintenance, repairs, and contacting service for information or spare parts.
Overview of the universal combined 6-working cycle machine and its main components.
Details intended uses, materials, prohibited uses, and safety precautions for machine operation.
Technical data including dimensions, weights, and performance characteristics.
Defines the recommended working area for the machine, considering space and operator movement.
Specifies maximum dust emission values for different machining operations.
Provides measured noise emission levels and factors influencing operator exposure.
Lists and describes the various safety devices installed on the machine to ensure operator safety.
Essential rules and precautions for safe operation, handling, and maintenance of the machine.
Identifies potential residual risks present even with safety regulations and proper use.
Explains the meaning of safety and information signals applied on the machine for hazard awareness.
Instructions for safe lifting and handling of the machine by trained personnel using appropriate equipment.
Defines requirements for the installation zone, including space, floor capacity, and utilities.
Guidance on re-installing machine parts that were disassembled for packaging and transport.
Procedures and checks for safe and correct electrical connection by a qualified electrician.
Guidelines for proper operation of the chip suction system to ensure dust removal and machine efficiency.
Instructions for safely mounting and adjusting various tools and cutters on the machine.
Procedures for adjusting the surfacing tables to achieve the desired stock removal.
Steps for adjusting the thicknessing tables to achieve the required workpiece thickness.
Guidance on adjusting the fence unit for parallel cuts with the circular saw and surface planing.
Instructions for positioning and adjusting the spindle moulder fence based on the operation type.
Details on adjusting the shaping router hood for different operations and depths.
Procedure for changing the spindle speed by adjusting belt tension and motor position.
Description of the machine's control panel, its components, and their functions for operation.
Explanation of the surfacing table operation for straightening wood pieces and trimming panels.
Instructions for obtaining the required workpiece thickness after surfacing using the thicknessing operation.
Guidance on using the circular saw for cutting panels, depending on size and type of cut.
Overview of operations possible with the moulder unit: tenoning, rabbeting, shaping, and profiling.
Instructions for operating the slotter for making through or blind slots and holes.
Procedure for checking, replacing, and tightening V-belts for optimal machine performance.
Guidelines for periodically checking the functionality of safety devices for machine safety.
Instructions for thorough cleaning of the machine and its parts after each working cycle.
Recommendations for weekly cleaning and lubrication of mobile machine components.
Procedures for replacing parts with original components and proper disposal of materials.
Guide to identifying common machine malfunctions, their causes, and recommended solutions.
General
