To Next PageTo Next Page
Need help?Do you have a question about the MiniMax C 30 GENIUS and is the answer not in the manual?
Details intended use, prohibited materials, tool requirements, and safety precautions.
Identifies and describes the various safety devices installed on the machine.
Details essential safety rules for operating, servicing, and maintaining the machine.
Provides instructions for safely lifting and unloading the machine by skilled personnel.
Provides essential information and warnings regarding electrical connection by a qualified electrician.
Guides on assembling and adjusting milling cutters, including safety precautions.
Guides on assembling and adjusting milling cutters, including safety precautions.
Details the process for mounting and adjusting planer cutters, including safety notes.
Describes the control board layout and the functions of its various devices and switches.
Provides instructions for safely starting the machine, ensuring tools and protections are secure.
Details the procedure for stopping the machine and disconnecting it from the power supply.
Explains how to use the emergency stop button to immediately shut down all machine circuits.
Provides essential advice on correct use of circular saw blades, including safety and maintenance.
Outlines the operations possible with the moulder unit: tenoning, rabbeting, shaping, profiling.
Guides on working with the slotter, including electrical connection and tool mounting.
Provides instructions for checking, replacing, and tightening V-belts to ensure proper machine operation.
Details belt replacement and tensioning for the cutterblock, saw, and moulder spindle.
Details belt replacement and tensioning for the cutterblock, saw, and moulder spindle.
Details belt replacement and tensioning for the cutterblock, saw, and moulder spindle.
Outlines the procedure for periodically checking safety microswitches, emergency stop, and guards.
Provides a guide to identify common machine troubles, their causes, and solutions.
General
