1
MINIMED
®
670G SYSTEM | CHANGING THE QUICK-SET INFUSION SET QUICK REFERENCE GUIDE
START HERE
1
5
2
1 2 3 4
6
3 4
Wash your hands.
Press
. Select Options.
Select Reservoir & Tubing. Select New Reservoir.
Select Rewind.
Remove the infusion set you have been using by
loosening the adhesive and pulling away from body.
Remove the used reservoir from the pump.
Remove from package. Make sure
insulin vial is at room temperature
to reduce the risk of air bubbles.
Follow the next steps to ll reservoir with insulin and connect to the infusion set tubing.
Pull plunger down to
the amount that you
plan to ll with insulin.
Wipe vial with alcohol. Place
vial on table. Firmly press the
blue transfer guard onto vial.
Push and hold
plunger down.
Plunger
rod
Plunger
Transfer
guard
Reservoir
Transfer
guard
Insulin
vial
FILL RESERVOIR & CONNECT TO THE INFUSION SET TUBING
Continued on next page
To Next Page
