Need help?Do you have a question about the Minipa ET-1110 and is the answer not in the manual?
General| Brand | Minipa |
|---|---|
| Model | ET-1110 |
| Category | Multimeter |
| Language | English |
Details general features like display, overrange, data hold, and operating environment.
Covers DC/AC voltage, current, resistance, temperature, diode, and continuity specifications.
Identifies the display, rotary switch, temperature socket, and input terminals.
Explains how to measure AC/DC voltage, including warnings about voltage limits.
Details connecting leads and setting the switch for DC current measurement up to 200mA and 10A.
Explains how to connect leads and set the rotary switch for resistance measurement. Includes a warning.
Instructions for connecting leads, setting the switch, and interpreting diode test results.
Instructions for continuity testing, including power off, capacitor discharge, and buzzer indication.
Explains how to set the switch, insert the thermocouple, and measure temperature. Includes a warning.
Describes how to use the Data Hold function by pressing the HOLD key.
Provides steps for replacing the 9V battery, including disconnecting leads and removing screws.
Outlines the procedure for analyzing or replacing the fuse, referencing battery replacement steps.
To Next Page
