Need help?Do you have a question about the Minipa ET-2907 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Power Supply | 9V battery |
| DC Voltage Range | 200mV, 2V, 20V, 200V, 600V |
| AC Voltage Range | 200V, 600V |
| DC Current Range | 200µA, 2mA, 20mA, 200mA, 10A |
| Resistance Range | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Capacitance Range | 2nF, 20nF, 200nF, 2µF, 20µF |
| Display | LCD, 3.5 digits (1999 counts) |
Covers DC, AC, and AC+DC voltage measurements with detailed ranges and procedures.
Specifics on performing AC voltage measurements, including dBm/dB calculations.
Explains dBm and dB V measurements and reference settings in AC volts.
Details on how to perform DC voltage measurements.
Explains how to measure combined AC and DC voltage values.
Instructions for measuring frequency, duty cycle, and pulse width.
Guidance on measuring resistance, including tips and precautions.
Procedures and precautions for measuring capacitance.
Detailed guide for measuring AC and DC current with safety warnings.
Comprehensive table of electrical measurement ranges, resolutions, and accuracies.
To Next Page
