Minolta 7000 - Page 12

MOperation when film end
M, starts running
(forward) Pe Winding gears rotate. 1.2-sec timer sets.
Sprocket Stop feveecssecscceesseseeeeereeases Sprocket stops by detecting film-stuck.
Because of idle by friction spring. M, toe winding/rewinding gear, and sprocet
axis continue rotation. .
a
| Sprocket gear stop | Thevsanaareennasaanaareeraanes Winding-stop-gear, shutter-charge-gear stop.
|
M,
stop
|
sree
eee
anaanennnaecencanygens
Because
Sw.
4
has
not
be
turned
OFF
for
1.2
sec
after
M,
starts
running
(forward),
film.
end
is
detected,
and
Mj,
stops.
:
MOperation when rewinding
| Rewinding lever in ON position |
seueessnnesteessestnseee Rewinding ewiteh lever lock
M, starts running
{reverse)
Teeereceenanncaregcnceeaens Reversal rotation until Sw. 40 ON
This
will
relax
tension
of
winding
gears,
engaged
firmly
when
film-end,
and
enable winding/rewinding gear to engage easily with rewinding gears.
Winding/rewinding gear engaging a .
with rewinding gears 90s [ee Makes winding gears idle.
M, starts running
(forward)
|
Rewinding
gears
rotation
|
rreetaseaneeneersenenneeureegs
Rewinding
fork
starts
rotation,
| Sw. REW 3 ON + OFF | sever daeeeeataeeesensoneaeae While film is rewound properly,ON + OFF repeats with each rotation of
rewinding fork.
,
| Sw. SLS OFF — ON hr eee Turned ON when film comes off spool.
| Rewinding continuation for 5 Sec Jevcccceeessseeeeeeteeeeereees Takes film (including the leader) into cartridge completely.
ween a en een en namnn eee eeeeenes Rewinding completion.
Back cover open
jm] Rewind-switch-lever unlock i sete eeneaasenear stones tae eeas Winding/rewinding gear engages with winding gears.
My starts running | sees seeteeees indi ndi :
(forward) Further winding (winding completion)
weeesaeeenteecesc eer aseeaseeas By Sw.4 OFF,M, stops.