Minolta 7000 - Page 27

Related with motor set
1. For parts of A type which cannot be supplied, (X) is attached to the tail of
the part number in the table.
replace it with 8 type.
If it is necessary to modify the (X}-marked part,
2.
The
parts
are
interchangeable
with
other
types only
when
they come
in
a
set
with
the
relative parts of each type.
3. When there are relative parts to be modified, the part cannot be individually modified
to other type.
The relative parts must also be modified to make set part.
TYPE A TYPE B
2072-0424-01(X)
2072-0424-02
5am
3.5mm
2072+0424-01 2072-0424 -02
2072-0311-01 (X)
2072-0311-01
2072-0311-02
3, Sem
>
Sectional drawing Y
fy
jp
2072-0311-02
2072-9461-81
2072-9461-81 (Addition)
White, or black; |
either one will be used.
2071-9461-81 is not used
for Type B.