Need help?Do you have a question about the Minolta AUTO ELECTROFLASH 280PX and is the answer not in the manual?
General| Brand | Minolta |
|---|---|
| Model | AUTO ELECTROFLASH 280PX |
| Category | Camera Flash |
| Language | English |
Correct loading of the batteries into the unit.
Steps for mounting the flash unit onto the camera hot shoe.
Procedure to verify proper electrical connection between camera and flash.
Steps for detaching the flash unit from the camera.
Essential camera and flash settings for programmed autoflash mode.
Instruction to set camera mode to 'P' and lens to minimum aperture.
Step to power on the flash unit.
Focus on the subject within the specified range for programmed autoflash.
Verify the flash unit is ready to fire, indicated by the monitor light.
Ensure focus and then press the shutter button to take the picture.
Indicator for correct exposure after the shot.
Essential camera and flash settings for aperture-priority autoflash mode.
Instruction to set the camera mode dial to 'A' for aperture-priority flash.
Setting the film speed on the flash unit for reference.
Choosing between 'Hi' and 'Lo' power levels for flash output.
Step to power on the flash unit.
Steps to select the aperture before determining flash-to-subject distance.
Steps to determine distance before selecting the aperture.
Locate film speed and follow up to the aperture sloping line.
Find minimum distance by following the 'MIN' line and reading down.
Find maximum distance by following the 'Hi MAX' line and reading down.
Effect of exposure adjustment on flash range in P mode.
Calculating adjusted film speed for A mode exposure compensation.
Using a table to find adjusted film speed for A mode.
Using specific indicator bars for exposure adjustment in A mode.
Essential camera and flash settings for manual flash photography.
Setting the camera's shutter speed for manual flash synchronization.
Setting the film speed on the flash unit for reference.
Choosing between 'Hi' and 'Lo' power levels for manual flash output.
Step to power on the flash unit.
Verify the flash unit is ready to fire in manual mode.
Ensure focus and then press the shutter button to take the picture.
Methods for setting aperture and distance in manual flash mode.
Focus on subject and determine distance.
Calculate the correct aperture using the guide number and distance.
Adjust the camera lens to the calculated aperture.
How to use the wideangle diffuser in P mode.
How to use the wideangle diffuser in A mode.
How to use the wideangle diffuser in A and M modes.
How to use the wideangle diffuser in M mode.
Details on the Power Grip 2 accessory and its connections.
Using the off-camera shoe for flexible flash positioning.
Maintaining the flash unit after periods of non-use.
Recommended operating temperature range for the flash unit.
Important precautions regarding moisture and dryness for the flash.
Warning against disassembling the flash unit for repairs.
Information about the flash's energy-saving circuit.
Cleaning instructions for the flash unit.
Battery removal recommendation for extended storage.
Avoiding storage in vehicles or environments with extreme temperatures.
To Next Page
