1
Connection to personal computer
Use RS-232C connecting cable (optional accessory LS-A12) to connect
to a personal computer.
<Caution related to connection>
Connect the connector to the proper direction securely.
Always turn off the power of both this product and the personal computer
before carrying out the connection.
Remove the connection cord always holding the plug or the connector. And
do not pull or forcibly bend the cord.
Do not touch, stain or apply unreasonable force to the terminal part of the
connector.
Arrange the cord with extra length. If there is not sufficient extra
length, it may cause connection failure or disconnection.
<Data output terminal>
RP17-13RA-12SD made
by Hirose is used
for the connector
for data output of
this product.
Connect and use RP17-
13P-12PC connector
made by Hirose.
Absolute maximum rating of output transistor
iTa 25CDTC124XUA, made by Rohmj
V CEO 50V Ic 100mA
V CBO 40V Pc 200mW
To Next Page
Loading...
