Need help?Do you have a question about the Minolta CS-100A and is the answer not in the manual?
General| Type | Colorimeter |
|---|---|
| Measuring Method | Tristimulus values direct reading |
| Measuring Area | 1° |
| Measurement Range (cd/m²) | 0.01 to 100, 000 |
| Accuracy | ±2% |
| Light Receiving Element | Silicon photodiode with color filters |
| Viewing Angle | 1° |
| Measurement Time | 0.5 seconds |
| Display | LCD display |
Explains safety symbols and outlines essential precautions for correct instrument operation.
Provides critical precautions for securely connecting the instrument to a computer.
Details the pin layout, specifications, and function of the data output terminal.
Illustrates the pin-to-pin connections for RS-232C two-way communication.
Specifies the required communication parameters for the host computer.
Step-by-step guide for configuring the instrument to RS-232C communication mode.
Introduces the command list and provides important operational notes for RS-232C communication.
Explains the delimiter (CR+LF) and breakpoint (comma) used in data communication.
Lists and describes various error check codes for identifying communication issues.
Details command input formats, space handling, and potential error codes.
Provides in-depth explanations for various commands like MES, MDS, RCR, TDR, UCR, TDS, TDW, UCW, and CLE.
Compares internal data values (Y, X, y) with displayed output, noting digit handling.
Explains how Y value differences and chromaticity differences are calculated and presented.
Illustrates the communication sequence for the MES measurement command.
Details the signal timing and flow from the PC to the CS-100A.
Describes the signal timing and flow from the CS-100A to the PC.
To Next Page
