D-48
(10) Cleaning of the Toner Antispill Seal
(11) Removal of the Main Erase Lamp
(12) Cleaning of the Main Erase Lamp Filter
NOTE
When reinstalling the Toner Antispill Plate and Toner
Antispill Seal, press them in the direction of the arrows.
4002D139AB
1. Remove the Toner Antispill Seal.
2. Using a brush, clean the Toner Antispill Seal.
4002D140AA
1. Swing down the Front Door.
2. Unplug one connector.
3. Remove one screw and the Main Erase Lamp.
4002D141AB
1. Swing down the Front Door.
2. Remove the Main Erase Lamp Filter.
4002D142AB
To Next Page
Loading...
