D-58
19. Remove two screws and the Web Roller Assy.
4002D162AD
20. Remove two springs.
21. Remove one shoulder screw and the Lower Exit
Guide Assy.
4002D165AA
NOTE
When reinstalling the Upper Fusing Guide Plate Assy,
press both ends of the guide plate up against the
frame.
4002D164AB
22. Remove two screws and the Upper Fusing Guide
Plate Assy.
4002D163AA
23. Loosen the front roller pressure screw and unhook
the upper end of the spring.
NOTE
Repeat the same step for the spring in the rear.
4002D166AC
To Next Page
Loading...
