D-73
5. Move the Pick-Up Solenoid in the direction of arrow
➀
, then slowly move it in the direc-
tion of arrow
➁
.
6. Move the Pick-Up Solenoid up to the position where the Lock Lever of the Paper Stop-
per becomes perpendicular (the position where the Paper Stopper is locked).
NOTES
• Be careful that the Pick-Up Solenoid is canceled from its set condition if moved exces-
sively.
• If the set condition is canceled, set the solenoid to the energized (ON) position again and
repeat steps starting with step 6.
7. After the adjustment has been made, tighten the two the Pick-Up Solenoid mounting
screws.
Check after Adjustment
Check that the Paper Stopper is securely locked perpendicularly when the Pick-Up Sole-
noid is ON.
4002D208AA 4002D209AA
To Next Page
Loading...
