Minolta DYNAX 5 - Page 104

REPAIR
GUIDE
34 A(2163)
m Fig 5
1, Align AF COUPLES LEVER as illustrated, then atide it in arrow direction to fit.
2. Insert AF COUPLER LEVER SHAFT to the designated position.
@ Fig 6
Install the tip of SLLE CONTACT-B beneath the
projection of APERTURE BASE PLATE ASSY.
m Fig 7
1. Apply G-75 to tha designated position of BAYO-
NET SP.
2. Iastall BAYONET EP aligning its holns with the
posta of BAYONET MOUNT SPACER ae iliue-
2. the posts of BAYONET MOUNT SPACEE to
notehea of BAYONET MOUNT aligning the
couler holes of BAYONET MOUNT and
BAYONET MOUNT SPACER.
Fit
the
AF