Minolta DYNAX 5 - Page 82

1. Install REMOTE-RELEASE ASSY,
2. Hold the BACK COVER LOCK RELEASE LEVER in arrow direction, then fit the pi
LOCK BASEPLATE ASSY to the poet of SPOOL BOTTOM PLATE.
then ft SAFETY LOCK BASEPLATE ASSY to
@ Fig. 5
FLASH CONVERTER PCB-B ASSY
@ Fig 7
42 A(2163)
hole ta post of the bady.
1. Install FLABH CONVERTER PCB-5 ASSY Sitting the
2. Arrange tha lead wires as shown.