Minolta DYNAX 5 - Page 91

@ Fig. !
(2163)A 21
Fig. 2
1. Stick #9984-2190-50 to FPC-A ASSY as illus-
trated to affix SPC] HOLDER ASSY.
2 Stick #8384-2190-50 to SPC) HOLDER ASSY as
illustrated, then fold back the flex of FPC-A
(6x1l0mm)
Stick #9384-2290-90 to FUNCTION DIAL BASE-
PLATE as ilinetrated.
@ Fig. 3
m Fig. 4
Insert the projection of DIAL SP SPACER to the
notch of FUNCTION DIAL BASEPLATE.
After completing the SPC position adjustment,
apply 3-20 to the designated position.
@ Fig. 5
@ Fig. 6
Stick #9384-2790-90 to the designated position.
SPC! HOLDER ASSY
Stick #6384-2290-90 to the designated position.
4
30m0
Sivday