Minolta DYNAX 5 - Page 93

@ Fig. 15
Insert the spring of SPOOL GEAR ASSY fitting to
the projection of SPOOL BOTTOM PLATE as
SPOOL GEAR ASSY
illustrated.
Fig. 15
Stick #9984-2290-90 to the designated position.
(6x1 mim)
(2163)A 23
wy
Set the plamctary gear ac illustrated, and fit the
Hola of WINDING BASEPLATE ASSY to the post
of TRIPOD BASE PLATE.
Fit the wire (W106) between WINDING BASE-
PLATE ASSY and TRIPOD BASE PLATE.
WIND BASEPLATE ASSY
TRIPOD BASE PLATE
3GINS
tivdsu
M@ Fig. 16 (Panoramas model only)
Set PANORAMA CHANGEOVER LEVER to the
“STD.” position, then install BOTTOM COVER.
BOTTOM COVER =>
SY DATE
\c
eX
CE
ej.
fo \
/
PANORAMA
CHANGEOVER LEVER
@ Fig. 17
@ Fig. 18
Stick BACE TERMINAL DUSTPROOF SHEET io
the designated position.
Stick BODY SHEET to the designated position,