SHOOTING IN FULL-AUTO MODE
22 23
Turn the camera on.
Press the program-reset
button.
• The camera will return to the default
settings.
Turn eye-start on.
Raise the flash if flash is
desired. Put the flash down if
no flash is to be used.
• The flash always fires when up.
Rotate the zooming ring, if
using a zoom lens, until your
subject is framed as desired.
• For AF Zoom xi or AF Power Zoom
lenses, slide the lens' AZ/MZ switch
to AZ.
Gently press the shutter-
release button all the way
down to take the picture.
• The film automatically advances to
the next frame.
When there are only nine frames
remaining on the roll of film, the
camera will start a countdown.
The number remaining will appear in the viewfinder.
• The countdown will not appear for non-DX-coded film.
Align the subject within the
focus area and press the
shutter-release button partway
down to lock focus and
exposure.
2152EE 17/10/97 10:52 AM Page 22
To Next Page
Loading...
