53
3.Press the adjust button or zoom
lever to change the blinking
item.
• The numerals continues to change as
long as the button is held down.
• Pressing W side of the zoom lever
counts down, the T side counts up.
5.Press the date button until all items stop blinking to set the
updated information.
• The camera will return to the shooting mode automatically after five seconds.
Pressing the select button again or pressing the shutter-release button partway
down will also return the camera to the shooting mode.
• Pressing the select button until the date/time display stops blinking can also
set the calendar and clock.
52
FOR OWNERS OF THE QUARTZ-DATE MODEL
4.Repeat steps 2 and 3 until all items on the date and time display
are correct.
To Next Page
Loading...
