Minolta MAXXUM 5 - Page 75

Me Fig. 1
(2163)A 5
Apply B-60 to entire of shaded area to affix
BUZZER, then arrange the lead wires ne as
illustrated.
Thread the straight-part of BATTERY CONTACT-
to the hole of SPOOL TOP PLATE, thes Li -y
hook the tip of BATTERY CONTACT-B (-) into the
SPOOL TOP PLATE.
@ Fig. 3 (ate model only)
Fit the LED-pgart of FPC-DATE ASSY to the notch
on the body , then assemble SPOOL TOP PLATE.
aan)
eivdsad
@ Fig. 6
nated position vf the body.
“i
Body
is)
+8)
Stick WINDING SUPPORT SHERT to the desig. |
|