Need help?Do you have a question about the Minolta MAXXUM 4 and is the answer not in the manual?
General| Lens mount | Minolta A-mount |
|---|---|
| Built-in Flash | Yes |
| Camera type | SLR |
| Film type | 35mm |
| Type | SLR |
| Focusing System | TTL phase detection |
| Exposure Control | Program, Aperture Priority, Shutter Priority, Manual |
| Shutter Speed | 30 - 1/2000 sec |
| Film Speed Range | ISO 25 - 5000 |
| Power Source | 2x CR2 batteries |
Essential safety warnings regarding battery usage, handling, and environmental conditions.
Important cautions for product operation, including avoiding direct sunlight and extreme environments.
Step 1: Insert the two CR2 lithium batteries into the camera.
Step 2: Align the red mounting index and attach the lens clockwise.
Step 3: Slide the main switch to the ON position.
Step 4: Load film by aligning the tip with the red mark and closing the back cover.
Step 5: Press the program-reset button to set the camera to full-auto.
Step 6: Center subject in wide focus frame and press shutter release halfway.
Step 7: Press shutter release fully when focus/exposure are ready.
Details the various buttons, dials, and components on the camera body.
Explains the information and indicators displayed on the camera's data panel.
Describes the elements and readouts visible within the camera's viewfinder.
Instructions for correctly attaching the camera strap using the holder ring and eyelet.
Guide to inserting the two 3V CR2 lithium batteries into the camera.
Explains how to read the battery indicators for power status.
Procedure for changing batteries while preserving date/time settings.
Instructions for mounting interchangeable lenses onto the camera body.
Procedure for safely detaching lenses from the camera.
Guide on how to load film, ensuring correct alignment and camera settings.
Explanation of the film chamber lock indicator and its function.
Details the automatic film rewinding process after the last frame.
Procedure for manually rewinding film before the roll is finished.
Introduction to full-auto mode for simple shooting without constant adjustment.
How to press the shutter button for autofocus and taking pictures.
Recommended techniques for holding the camera steady during shooting.
Explanation of audio signals for focus confirmation and self-timer.
Steps to disable the camera's audio signals.
Procedure to re-enable the camera's audio signals.
Step-by-step guide for taking photos using full-auto mode.
Understanding the viewfinder signals indicating focus status.
Guidance on challenging focus scenarios and using focus lock.
How to use the focus lock function for off-center subjects.
Explanation of the built-in flash operation in P-mode.
Interpreting viewfinder signals related to flash status.
To Next Page