Minolta MD-90 - Page 11

ATTACHING AND REMOVING
MD.gO
The Motor Drive MD-90
can be attached
or removed
from
the camera at any time.
lf
film has not
been
advanced
prior
to attach-
ing motor drive,
motor
drive
will
auto-
matically advance
film
to
next frame when
the
selector
dial.is
set to
one
of
its operating
posrtrons.
To
attach:
1. With
selector dial at
"OFF"
position,
align
motor
drive's
guide
pins
and attaching
screw with
guide
holes
and tripod
socket on
bottom of camera.
2.
Turn
grooved'
ring'on'aita-ching
screw
clockwise until motor drive
is
secured.
www.orphancameras.com