3.2 Photo Shooting
Power the camcorder on and press the MODE button or press the icon in the
top left hand corner of the touch screen to switch to Photo mode.
1.
Line up your shot by looking at the LCD screen to see what is in the shot.
2.
Hold the camera steady, press the PHOTO button to capture a photo.
3.
The number of photos that can be captured at a particular resolution
will be displayed in the top right corner of the screen.
4.
The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of photos
you are able to be save to the memory card. Before capturing any photos,
you can select a preferred photo resolution.
3.2.1 Photo Size (Resolution)
This function sets the photo resolution. The higher the resolution, the greater
the photo quality and the larger the file size of the photo.
1.
In Photo Mode press the MENU button.
2.
Select ‘Photo Size’ using the UP or DOWN buttons and press the
RECORD/OK button to enter the ‘Photo Size’ submenu.
3.
Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button to confirm the selected photo resolution (30MP,
24MP, 20MP, 16MP, 12MP, 10MP, 8MP, 7MP-Wide, 5MP, 3MP).
4.
Press the MENU button to exit the menu without making a selection.
3.2.2 Quality
The Photo Quality function determines the level of compression the
camcorder uses when saving photos to a memory card.
1. In Photo Mode press the MENU button.
2. Select ‘Quality’ using the UP or DOWN buttons and press the
RECORD/OK button to enter the ‘Quality’ submenu.
3. Press the UP or DOWN buttons to select the required quality option
(Super Fine, Fine, Normal), and press the RECORD/OK button to confirm
your selected image option. Super Fine uses the least amount of
compression for saving, and as a result produces a higher photo quality.
4. Press the MENU button to exit the menu without making a selection.
To Next Page
Loading...
