Minolta MN260NV - Page 25

3. Using Your Camcorder
24
3.3.3 Rotate
This function is used to rotate images.
1. In Playback Mode press the MENU button, and use the UP or DOWN
buttons to select ‘Rotate’. Press the RECORD/OK button to enter the
‘Rotate’ submenu.
2. Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button for your selected setting (90°, 180°, 270°).
3. Press the MENU button to exit the menu without rotating the current
picture.
3.3.4 Slideshow
Photographs can be viewed as a slideshow on the camcorder.
1. In Playback Mode press the MENU, and use the UP or DOWN buttons to
select ‘Slideshow’ Press the RECORD/OK button to enter the ‘Slideshow’
submenu.
2. Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button to confirm your selected setting (3 Seconds, 5
Seconds, 10 Seconds).
3. Once the time duration has been chosen, the slideshow will start playing.
4. Press the RECORD button to stop the slideshow.
5. To exit the ‘Slideshow’ submenu, press the MENU button.
3.3.5 Video Playback
Videos can be played back and viewed on your camcorder.
1. In Playback Mode, press the UP or DOWN buttons to select the video file
for playback.
2. Press the RECORD/OK button to start playing the video. Press the
RECORD/OK button a second time to stop the video.
3. During playback, push the ZOOM button (left or right) to raise and lower
the volume of the video.
4. During playback, press the PHOTO button to pause the video, press it
again to resume playing.
Alternatively, your camcorder’s menus can be navigated
via the touch screen.