Power Off’ and press the RECORD/OK button to enter the ‘Auto Power Off’
submenu.
2. Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button to confirm your selected setting (Off, 1 Minute, 3
Minutes, 5 Minutes).
3. Press the MENU button to exit the menu without making a selection.
3.4.4 Beep Sound
This function can turn the sound the camcorder makes after pressing a
button, on or off.
1. In Setup Mode, use the UP or DOWN buttons to select ‘Beep Sound’ and
press the RECORD/OK button to enter the ‘Beep Sound’ submenu.
2. Press the UP or DOWN buttons to select your desired setting (On, Off),
Then press the RECORD/OK button to confirm your selection.
3. Press the MENU button to exit the menu without making a selection.
3.4.5 Frequency
This function sets the frequency of the camcorder from 50Hz to 60Hz.
Please check the frequency of your location and set accordingly.
1. In Setup Mode use the UP or DOWN buttons to select ‘Frequency’ and
press the RECORD/OK button to enter the ‘Frequency’ submenu.
2. Press the UP or DOWN buttons to select your desired frequency. Then
press the RECORD/OK button to confirm your selection (60Hz, 50Hz). The
default frequency for the United States is 60Hz.
3. Press the MENU button to exit the menu without making a selection.
3.4.6 Format Memory Card
The format setting erases all photos, videos and data stored on your
memory card.
1. In Setup Mode use the UP or DOWN buttons to select ‘Format Memory
Card’ and press the RECORD/OK button to enter the submenu.
2. Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button for your selected setting (Yes, No).
3. Press the MENU button to exit the menu without making a selection.
NOTE: This will delete all of your media and cannot be undone.
To Next Page
Loading...
