Minolta MN260NV - Button Function Descriptions

5
1.2 Button Function Description
Function
Description
Power | IR
Tap once to power on, press and hold for 2
seconds to power off. While powered on, tap once
to enable or disable IR night vision.
Mode
Tap to cycle between Video, Photo, Playback and
Setup modes.
Menu
Tap to access and exit all menus and submenus.
Zoom
In Video or Photo: Press right to zoom-in. Press
left to zoom-out.
In Playback: While viewing a photo, slide to the
right to zoom in on the photo, slide to the left to
zoom out.
In Video Playback: While playing a video, press
to increase or decrease the volume.
Record | OK
In Video: Tap to start/stop recording video.
In Playback: Tap to play a recorded video, tap
again to stop the video.
OK button in menus. Tap to confirm a setting
Photo
In Photo: Tap to capture a photo.
In Playback: While playing a recorded video, tap
to pause and tap again to resume
UP
In Photo and Video: Tap to increase the
exposure value.
In Playback: Tap to scroll through captured
media.
Tap to scroll through menus and submenus.
Down
In Photo and Video: Tap to increase the
exposure value.
In Playback: Tap to scroll through captured
media.
Tap to scroll through menus and submenus.
Infrared LEDs
Infrared LED to aid with vision and recording in
darkness.
Tripod Mount
Mount port for attaching to a tripod nut.
1. About Your Camcorder