Minolta MN2K10NV - Page 6

2. First Use
1.2 Button Function Description
Function
Description
Power | IR
Tap once to power on, press and hold for 2
seconds to power off
. While powered on, t
ap once
to enable or disable IR night vision.
Mode
Tap to cycle between Video, Photo, Playback and
Setup modes.
Menu
Tap to access and exit all menus and submenus.
Zoom | Left/Right
In Video or Photo: Press right to zoom-in. Press
left to zoom
-out.
In M
enu: Press to go to the next setting option.
In Playback:
Press to scroll through
media gallery.
In Video Playback:
Press to
go to the previous or
next photo. While viewing a photo, slide to the right
to zoom in on the photo, slide to the left to zoom
out.
Photo | OK
In Photo: Tap softly to focus the image. Hard tap
to capture a photo.
In Video: Tap to pause a recording, tap again to
resume recording.
In Playback: While playing a recorded video, tap
to pause and tap again to resume.
OK button in menus. Tap to confirm a setting
Reco
rd
In Video: Tap to start/stop recording video.
In Playback:
Tap to play a recorded video, tap
again to stop the video.
Display
In Photo and Video: Tap to turn off the icons on
the screen, tap again to turn the display off, tap a
third time to turn on the display with the icons.
Infrared Night
Vision
Infrared LED to aid with vision and recording in
darkness.
Tripod Mount
Mount port for attaching to a tripod nut.
Memory Card
Door
Door to cover storage slot for inserting a memory
card.
Battery Release
Switch
Slide the switch to remove the battery.
5