Minolta MN30WP - Page 23

3. Using Your Camera
25
the Language menu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected language.
5. Press the MENU button to exit the settings menu without making a
selection.
3.1.20 Setup – LCD Brightness
This function allows you to set the brightness of the camera’s LCD screen.
1. In Photo Mode press the MENU button.
2. Select ‘Setup’ using the LEFT or RIGHT buttons.
3. Select ‘LCD Brightness’ using the UP or DOWN buttons and press OK to
enter the LCD Brightness menu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Dark, Normal, Bright).
5. Press the MENU button to exit the settings menu without making a
selection.
3.1.21 Setup – Default Setting
Factory default settings can be restored in this menu. This function will not
delete the media stored on the memory card, and will only restore all of the
menu’s setting back to factory default settings.
1. In Photo Mode press the MENU button.
2. Select ‘Setup’ using the LEFT or RIGHT buttons.
3. Select ‘Default Setting’ using the UP or DOWN buttons and press OK to
enter the Default Setting menu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (OK, Cancel).
5. Press the MENU button to exit the settings menu without making a
selection.
3.1.22 Setup – Format (Memory Card)
The format setting erases all photos, videos and data stored on your
memory card.
1. In Photo Mode press the MENU button.
2. Select ‘Setup’ using the LEFT or RIGHT buttons.
3. Select ‘Format’ using the UP or DOWN buttons and press OK to enter the
Format menu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (OK, Cancel).
5. Press the MENU button to exit the settings menu without making a
selection.
NOTE: This will delete all of your media and cannot be undone.