Minolta MN4K40NV - Page 20

19
3.2.3 Setup – Color Effect
This function sets the color filter effect of a video.
1. In Photo Mode press the MENU button.
2. Use the ZOOM button to select Setup and press the PHOTO button to
enter the menu.
3. Select ‘Color Effect’ using the ZOOM button and press the PHOTO
button to enter the ‘Color Effect’ submenu.
4. Press the ZOOM button to navigate the menu and press the PHOTO
button to confirm your selected filter (Standard, Sepia, Monochrome,
Vivid).
5. Press the MENU button to exit the submenu.
3.2.4 Setup – Exposure
This function adjusts the frame brightness in your video.
1. In Photo Mode press the MENU button.
2. Use the ZOOM button to select Setup and press the PHOTO button to
enter the menu.
3. Select ‘Exposure’ using the ZOOM button and press the PHOTO
button to enter the ‘Exposure’ submenu.
4. Press the ZOOM button to navigate the menu and press the PHOTO
button to confirm your selected exposure mode (+3, +2, +1, 0, -1, -2, -3).
5. Press the MENU button to exit the submenu.
3.2.5 Setup – Metering
Metering mode refers to the way in which a camcorder determines the
appropriate exposure (quantity of light reaching the camcorder lens). Spot
metering will only base the exposure setting on a very small area of the
scene. Center metering will use the light from the center of the LCD and the
Multi setting measures the light at several points on the screen.
1. In Photo Mode press the MENU button.
2. Use the ZOOM button to select Setup and press the PHOTO button to
enter the menu.
3. Select ‘Metering’ using the ZOOM button and press the PHOTO button
to enter the ‘Metering’ submenu.
4. Press the ZOOM button to navigate the menu and press the PHOTO
button to confirm your selected exposure mode (Multi, Center, Spot).
5. Press the MENU button to exit the submenu.
3.2.6 Setup – Sharpness
This function adjusts the visible detail of a photograph.
1. In Photo Mode press the MENU button.
3. Using Your Camcorder