ϯhƐŝŶŐdŚĞĂŵĐŽƌĚĞƌ
The directions below are for iOS smartphones and tablets. The
process for connecting your MN4KP1 to an Android smartphones and
tablets is similar to the processes outlined below.
Power the camcorder on and press the UP button once to enable the
camcorder’s WiFi network. To disable the camcorder’s WiFi network,
press the UP button again.
The status LED on your camcorder will blink BLUE while enabled and
searching for a WiFi connection.
Go in to your smartphone’s WiFi network settings menu, select the
network ID named “MN4KP1” and enter the password 1234567890.
The status LED on your camcorder will stay a steady BLUE when
connected, and the camcorder screen will turn off.
To Next Page
Loading...
