54
Setting the Date Stamp
The date of recording can be printed directly
on the still images. This function must be
activated before the image is captured. Once
date and time are
stamped on an image, they
can no longer be edited or deleted.
Limitations of Date Stamp functions are as
follows:
x Available for still images only.
x
This feature does not apply to continuous
shooting mode.
x
In vertical or rotated images, the date and
time on your images still appear
1.From the Record menu, select Date Stamp.
2.Use the
or keys to go through the selection.
OK
button to save and apply changes.
Setting Auto Review
The Auto Review function lets you vie
captured image right after shooting it.
If Auto review is On, the camera will display
the captured image for 1 second
monitor.
To set Auto Review
1. From the Record menu, select Auto
Review.
2. Use the
or
selection.
3. Press the OK
changes.
Blink Detection
Nothing ruins a great picture more than having your subjects' eyes closed.
Blink Detection provides you with extra assurance when capturing
once-in-a-lifetime moments like holding a trophy with teammates after winning
a basketball game.
If closed eyes are detected, a saving confirmation menu appears on the screen,
To Next Page
Loading...
