71
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
1. Press Menu button to launch the
Record/Playback Menu.
2. Use the
or
tab to Setup menu.
3. Use the
or
the menu selections.
4. To select an item, press the OK
key.
5.
Change the submenu settings using the
4-way navigation control.
6. Press the OK
button to save and apply
settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the OK button to apply changes.
Item
Description
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera
is turned on.
Enables or disables shutter sound when
Shutter button is pressed. Shutter sound
is not available when recording videos.