Minolta SR T101 - Lenses

USING INTERCHANGEABLE ROKKOR LENSES OTHER THAN MC LENSES
When using Rokkor Lenses designed for the
Minolta SR -1, SR -3 or SR -7, which do not have
a
meter cou pi i ng pi n, you must use the
"stop-down measurement system" to set ex-
posure.
With this system the indicator needle moves
when the lens diaphragm is opened or closed
and
the follower (circle-tipped) needle is ac-
tivated by the shutter-speed dial.
Auto Rokkor Lenses
1) Advance the film .
2) Press
the diaphragm stop- down button
(it will remain depressed l.
3) Set the sh utter speed .
4)
Turn the diaphragm ring until the two
needles are aligned. (The diaphragm can be
set
first .)
5)
Press the diaphragm stop-down button
again.
61 Focus and shoot.
- The diaphragm stop-down button will not
operate if the film advance lever has not been
advanced
completely.
• When the diaphragm stop-down button is
pressed the second time, the diaphragm
reopens to maximum aperture .
• When
the shutter is released, the diaphragm
automatically cl oses down to the preset
aperture and reopens.
39