Minolta SRT 101 - H. Dismounting of Aperture reducing base plate

H. Dismounting of Aperture reducing base plate
1.
Take
out
the
front
base
frame.
(See
P.
7).
2. Attach
to the
rewinding
shaft the
rewinding szat(3353) so as to
take out the bottom
cover. (See P. 5).
3. Expose the bottom of the body
and disconnect the charge lever-B
spring
(3170),
rub plate
spring (2580), engaged with
the
charge lever-B
axis(9052).
Then, take out
the
axis(9052).
Take out
the
coupling plate spring(2582)
and loosen
and
take out
one
setscrew (B11-2%3.5)
so
that
the aperture reducing base plate(2571 set) may be takenout
of
the camera body.
When
taken out, take
out also the charge
Jever
axis receiver(3157) located
in
the charge
lever-B
(3169)
of the comera
body.
Fig. 7
BlI-2%3.5