Minolta SRT 101 - I. Dismounting of Slow-gear and Shutter base plate-A

I. Dismounting of Slow-gear and Shutter
base plate-A
1, Take out the top cover. (See P. 5).
2. Loosen and take out two setscrews(B13-1.7%2.5) and take out the slow governor(239]).
3. Take out two eye-pece frame setscrews(9158) and the eye-piece frame(S061).
4. Take out the TV coupling string(408)), (Refer to dismounting of needle following base
plate. P. 10).
fh. Take out the index coupling string(5053). (Refer to dismounting of viewfinder meter
block. P. 6).
6. Take outside the lead wires (white and brown colored) placed in the cord holder (2263) and
loosen and take out one setscrew(B19-1.7%4.2). Then take out another setscrew(B19-
1.7% 4.2).
7. Loosen and take out two setscrews (B1)-1.7%2.5). Then take out the pulley base (4077
set)and one pulley base axis-B(9156) and also another pulley base axis-A(9153) so that
the speed dial stopper (2159), shutter base plate-A (2049 set) may be taken out.
Fig. 8
|
Wea ica,