Minolta SRT 101 - K. Dismounting of Shutter base plate-B

yP
eye
Ts
10.
K. Dismounting of Shutter base plate-B
Dismount the front base frame.(See P. 7).
Dismount the slow gear and the shutter base plate A.(See P. 12).
Take out the winding base plate and the shutter gear(3004).
Take out the bottom cover. (See P. 5).
Loosen and take out two setscrews(BL1-I.7%8) of the X-contactor from the front side of
the camera body. Then take out the wire cord press(2213) and the X-contactor holder
(2211),
Take out the battery cap(4202) from the bottom of the camera body. Then take out also
the mercury battery and the battery case cover(4276). Loosen and take out three setscrews
(B19-1.7S) and take out the battery case(4203). Insert a driver from the hole of
the camera body located below the battery case(4203) so as to take out the brake spring
adjusting nut (2113), the brake spring(2112), the washer (W-15) and the friction ring(2110).
Pull out the friction ring stopper(9223), and also the transmit tube-A(2108) and the
washer (W-13).
Loosen and take out one setscrew(B13-1.4%3) and one cartain gear setscrew(9117). Then
take out the FP earth contactor(2223) and the starting lever axis(2162) and then the
starting lever (2047).
Take out the coupling washer(E-1.2) and then the washer(W-5), driving gear (2042) and
the variable gear(2041).
Hold
in
position
the
first
curtain
shaft(2053)
by
pliers
and
take
out
the
curtain
gear
setscrew (9117) so as to unscrew the first shutter curtain gear(2051). Hold in position
the
cylinder
below
the
gear
of
the
second
shutter
curatin
gear(2052)
and
then
take
out
the gear setscrew(9117) and unscrew and take out the curtain gear(2052).
Loosen
and
take
out
one
setscrew(B11-1.74)
and
one
screw-A(9109)
and
one
setscrew
(9111).
Lift
upwardly
the
base
plate-B(2050)
so
as
to
take
out
the
first
curtain
shaft
(2053)
and
the
second
curtain
shaft(2054).
Then
take
out
the
shutter
base
plate-B(2050
set).
Caution:
When
the
base
plate-B
(2050
set)
is
dismounted,
check
if
an
adjustment
washer
is
attached to the back of the base plate-B.