Minolta SRT 101 - L. Dismounting of Film take-up spool

=>
Wh
i
L. Dismounting of Film take-up spool
Dismount the slow gear. (See P. 12).
Dismount the winding base plate. (See P. 13).
Dismount the bottom cover. (See P. 5).
Take out the spool shaft nut(9415) from the lower side of the camera body so as to take
out the charge cam(3041).
Open the back cover and loosen and take out one setscrew(B51-1.7%2.5) for the spool
and secure firmly the spool gear(3162) on the camera body. Then tum the spool in the
clockwies
direction
and
take
out
one
setscrew(B21-1.7%4.5)
from
the
hole
of
the
spool.
Then pull out the film spool shaft(3031) upwardly, and then take out from the camera
body the decoration ring (3037), the spring washer (3039) and the film spool (3032).
Fig. 11 e— 3/62
,
a
——~B2i- 1.7 X45
BSl-17*K 25 -@€