36 37
SELF-TIMER
The self-timer delays release of the shutter for
approximately 10 seconds after you press the
shutter-release button.
1.Place the camera on a tripod, then
press the self-timer button until
appears in the data panel.
2.Place the focus frame on your
subject.
3.Press the shutter-release button all
the way down.
• will blink in the data panel. The self-timer
lamp on the front of the camera will blink
slowly during the countdown, then rapidly just
before the shutter is released.
• To cancel the self-timer, press the self-timer button again or turn the
camera off.
• Self-timer is automatically cancelled after the shutter is released.
✎ The camera locks focus on the subject when the shutter-release button
is pressed. Focus hold can be used (p. 18).
9222-2446-11 MM A804 3/4/98 1:07 PM Page 36
To Next Page
Loading...
