58 59
REMOTE CONTROL (Sold Separately)
The IR Remote Control RC-3 (not included) allows remote camera
operation from up to 5m (16.4 ft.) away.
• The remote control may not operate with backlit subjects or under fluorescent
light.
• To save power, the camera automatically shuts down if the remote control is not
operated for more than eight minutes.
• Remote control mode will remain selected after the picture is taken.
1.Place the camera on a tripod, then
press the remote-control button until
appears in the data panel.
2.Compose your picture.
3.Point the remote toward the front of
the camera and press • or 2s.
• Release (
•
): the remote-control lamp will blink
once before the picture is taken.
Delay (2s): the remote-control lamp will blink
several times before the picture is taken.
Continued on following page.
To Next Page
Loading...
