Minolta X-300 - Page 38

42
Mi Focusing plate replacement procedure
WiFor
view
finder
cleaning
without
camera
disassembly
or
focusing
plate
replacement
follow
the
procedure given below.
B Removal
Insert the tweezers between the focusing plate and focusing plate holder A.
Slightly tilt the tweezers to raise the focusing plate for removal.
BFig. 1
Focusing plate Aolder A
Bi Mounting
Hold the focusing plate as illustrated: fit part @ onto the bend of focusing plate holder B:
press down arrow-marked part ®);and insert projection ©) into the hold of focusing plate
holder A.
BFig. 2
Focusing plate hoicer 8
Hi Mounting check
After mounting the focusing plate, check that the view finder back and EE level are correctly
positioned, — :