Minolta XE - Body 10 Front Base Plate; After assembling

29
Body 10 Front Base Plate
Soldering points (Refer to page. 31)
[a] For incorporating, Point-6 (Refer to next page)
shay
Fes
N\ 9611 -2045-07
NY
1019
\
J
Pliobond es, \
NG 1038
: e
: s- 9% Tool No.
012 -2438-77
(Screw lock)
0163 ee a oe
Disengage string
A) For engaging string, refer to next page
1010
Washers for B. 8 adjustment
1081-81 hi |
1081-83 — ~ |
1081-85 i, *
1081-87 —
“® 9611-1732-04
(Screw lock)
WAfter assembling
@ Hold down the preset lever (0519) with finger, release the shutter, raise the mirror gradually and &
check if the shutter can be clicked.
If the shutter cannot be clicked, then the shutter block is incrrect or faulty.
@ Adjust the self-timer, (Refer to next page.)
@ Engage the diaphragm string. (Refer to next page. @)
@ Engage the SS designation string. (Refer to next page. #)