Minolta XG-7 - Page 19

4.
Operate
the film-advance
lever
slowly
until
the film has
begun
to wind firmly
around
the
take-up
spool
and the sprocket
teeth
are
engaged
with
holes
on
both edges
of the
film.
lf
the advance
lever
stops
at the end
of
a
full
stroke
during
this
procedure,
release
the
shutter
and continue.
Close
the camera back
and
push
in on it
until it clicks loaded.
A
red
"S"
should now
appear opposite the
index in the frame+ounter
window. Ad-
vance film
and
release
the shutter until
the
index
points
to
"1"
on the framecounter
dial.
5.
6.
L
www.orphancameras.com