EasyManua.ls Logo

Minolta XG-7 - Eyepiece Cap

Minolta XG-7
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. lt is then
only necessary to
confirm
focus
(see
p.
35), compose
your
picture,
and
release
the
shutter
(p.
38).
4.
The
XG's
accurate
range
of
shutter opera-
tion on automatic
mode is
1/1000 to
1
sec.,
as
indicated
by
the
shutter speed scale.
When
the
over-range
indicator
lights,
the
shutter
will lock to
prevent
overexposure.
Lighting of the
under-range
LED indicates
use
of a
shutter
speed longer than
one
second.
For
either, the aperture
or
other
conditions
should be adjusted
so that an
LED lights within
the scale's
range.
NOTE
o
When
the over-range indicator
lights, be
sure
not
to
depress the operating
button while
adjusting
the
aperture
or other
conditions.
This will
cause
the
shutter
to
release
at the
instant
-IhE
exposure is
within
metering
range arQ?Egri\"di
tlanted
pictu
re.
o
To continuously
provide
more or less expo-
sure
on automatic
mode, see
p.29.
Eyepiece
cap
For remote
or unmanned
operation or when
the
camera is set on
a support and
used without
viewing
on automatic
mode, be sure to attach
the
eyepiece
cap
as shown.
This
will
prevent
unwanted
light from
extering through
the
eyepiece and affecting
the
meter reading
and
exposure when the eyepiece is
not being shield-
ed by the
photographer's
head,
as
it
normally
would
be.
The
eyepiece cap
has
a slot that allows
threading
it
on the
camera strap
to
avoid
loss
and
keep
it
handy for
use.

Related product manuals