Minolta XG-M - Creative Shutter Control

Wireless Controller lR-1 Set
The lR-1 set Is designed for remote opera¬
tion of Minolta SLRs and 8mm cine cameras.
The receiver senses near-infrared rays emitted
from the transmitter and transfers a release sig¬
nal to the camera, permitting remote control
from distances up to 60 meters. When used with
extra receivers, the three-channel transmitter
allows independent operation of up to three
cameras with receivers set to different channels,
or simultaneous operation of an unlimited num¬
ber of cameras with receivers set to the same
channel.
Remote Cord S and L
These cords are designed for operating the
XG-M from a distance. Each screws into the
shutter release socket on the side of the lens
mount. The Cord S is 50cm (about 20 in.}' long,
while the Cord L is 5m (16-1 /2 ft.). These cords
facilitate shots mounted on a tripod or remote
wildlife pictures. In combination with the
Motor Drive 1, or Auto Winder G, the Cord L
can be used to make single or continuous
sequence exposures at the subject position,
from a remote location, etc.
47
48
Data Back G
This convenient accessory imprints the date
or other useful data on the filrn.as the exposure
is made to help Jdentify or classify your
pictures. It attaches in place of your XG-M's
removable regular back cover and synchronizes
with the shutter by means of a cord which is
Inserted into the camera's sync, terminal. Three
large dials set numbered day, month and year
indications which appear in reverse order on the
bottom right corner of the picture. The ability
to set letters and blank spaces further increases
the data back's usefulness for scientific and
other purposes. A red LED which also operates
as a battery check, lights to signal when data is
imprinting. Data-exposure intensity can be ad¬
justed for either normal or high-speed black-
and-white or color film. Power is provided by
two tiny alkaline-manganese or silver-oxide
cells.